We are Brow Henna official distributor of Irina Levchuk Lash and Brow Design in Newzealand
BROW LAMINATION STARTER KIT – SMALL
COMPOSITION 1 – affects the hair, allowing you to adjust its structure and direction
COMPOSITION 2 – gives the hairs the right direction and fixes the result
COMPOSITION 3 – completes the procedure of lamination of eyebrows and eyelashes while also moisturising the hair
Enough product to take care of 6 treatments.
BrowXenna®️ lamination of eyebrows and eyelashes is a stepwise procedure, which effect persists up to 2 months. The lamination procedure helps to strengthen the hairs, gives them volume and the desired shape, prevents breakage, and makes the natural color more saturated.
INSTRUCTION FOR USE
BrowXenna®️ lamination of eyebrows and eyelashes
Clean the area of the eyebrows. Do not use oil-based products.
For a thorough cleansing and preparing the eyebrows to the procedure, using the brush, apply on the hairs of the eyebrows BrowXenna®️ shampoo-foam for deep cleansing of eyebrows.
Wash off any remaining foam with water or NaCl solution.
Create the desired shape of eyebrows with an eyebrow wand. Fix the hairs in the right direction using the glue for BrowXenna®️ lamination of eyebrows and eyelashes.
Apply the composition №1 along the entire length of the eyebrows, retreating 1-2 mm from the roots. Leave for 5-6 minutes fine, 6-8 minutes medium, 8- 10 minutes coarse, the exposure time depends on the structure and thickness of eyebrow hairs. After the time has passed, carefully remove the remains with the dry cotton swab or micro-brush, moving in the direction from the roots to the ends of the hairs.
Apply the composition №2 along the entire length of the eyebrows, retreating 1-2 mm from the roots. Leave for 7-9 minutes, the exposure time depends on the structure and thickness of the eyebrow hairs. After the time has passed, carefully remove the remains with a dry cotton swab or micro-brush, moving from the roots to the ends of the hairs.
After removing composition № 2, if necessary, eyebrows can be tinted. Attention! The exposure time of the dye in the process of eyebrows lamination is much less than during usual coloring, and is no more than 2-3 minutes. Before tinting read the instructions carefully.
Remove the dye with a dry cotton swab.
Apply the composition № 3. With composition № 3 clean off glue remains and tint from skin and hairs of the eyebrows.
IMPORTANT! It is forbidden to wet eyebrows/eyelashes for 24 hours! Within 48 hours do not expose eyebrows/eyelashes to thermal and mechanical effects.
Optionally, use brow lamination glue for especially unruly brows.